Manual Material Handling Analysisi Of Workers Lifting Goods Using The Rappid Upper Limb Assessment (Rula) Method At Pt Intipratama Global Service
DOI:
https://doi.org/10.56882/jisem.v3i1.26Keywords:
Manual Materal Handling, RULA, Nordic Body Map, Musculosceletal DisordersAbstract
Manual Material Handling (MMH) Workshop in Maintenance is an activity that humans carry out every day. In this research, the qualitative method is used, which is a research method based on the philosophy of postpositivism, used for research on the natural conditions of objects. Based on the results of research on the level of work posture risk among goods lifting workers at PT Intipratama Global Services when carrying out goods lifting activities, there were 5 informants who displayed the risk level of work posture ranging from medium, high, and very high risk levels. Based on the results of research on the risk level of work posture at PT Intiprama Global Service when carrying out goods transport activities manually, the results of the calculations were that 5 informants had a very high risk level, and based on the results of the Nordic Body Map (NBM) calculations, 2 informants had complaints about the musculoskeletal system. with a very high level, 2 informants with a high level, and 1 informant with a medium level.
References
Adiyanto, O. P. (2019). Manual Material HAndling in the 'Karung' Lfiting Proccess Using Biomechanic and Physiologi Approach. Jurnal Penelitian Saintek, 24(1), 32-38.
Bintang, A. N., & Dewi, S. K. (2017). Analisa Postur Kerja Menggunakan Metode OWAS dan RULA. Jurnal Teknik Industri, 18(1), 43–54.
Dick, R. B., Hudock, S. D., Lu, M.-L., Waters, T. R., & Putz-Anderson, V. (2016).
Hamdy, M. I. (2020). Analisa Postur Kerja Manual Material Handling (MMH) pada Karyawan Bagian Pembuatan Block Menggunakan Metode Rapid Upper Limb Assessment (RULA) (Studi Kasus: PT Asia Forestama Raya). Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 5(1), 62.
Hunusalela, Z. F., Perdana, S., & Dewanti, G. K. (2021). Analisis Postur Kerja Operator Dengan Metode RULA dan REBA Di Juragan Konveksi Jakarta. IKRAITH-Teknologi, 6(1), 1–10. ILO. (2021).
International Labour Organisation. Report World Health Organisation, Joint Estimates of the Work-related Burden of Disease and Injury, 2000–2016. Kee, D. (2022). Systematic Comparison of OWAS, RULA, and REBA Based on a Literature Review. International Journal of Environmental Research and Public Health, 19(1).
Laksana, A., & Srisantyorini, T. (2020). Analisis Risiko Musculoskeletal Disorders (MSDs) Pada Operator Pengelasan (welding) Bagian Manufacturing Di PT X Tahun 2019. Jurnal Kajian dan Pengembangan Kesehatan Masyarakat, 64 - 73. Manual Materials Handling. Physical and Biological Hazards of the Workplace, 33–52.
Oesman, T. I., Irawan, E., & Wisnubroto, P. (2019). Analisis Postur Kerja dengan RULA Guna Penilaian Tingkat Risiko Upper Extremity Work- Related Musculoskeletal Disorders. Studi Kasus PT. Mandiri Jogja Internasional. Jurnal Ergonomi Indonesia (The Indonesian Journal of Ergonomic), 5(1), 39.
Ramdhani, S. A. (2017). Intisari pengaruh manual material handling tabung gas lpg terhadap nyeri pinggang bawah pekerja (studi kasus: pt. pertamina mor vi balikpapan). Kesehatan Dan Keselamatan Kerja, 2, 2.
Tarwaka, PGDip.Sc, M.ErG (2015). Egonomi Indutri. Dasar-Dasar Pengetahuan Ergonomi dan Aplikasi Di Tempat Kerja.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Journal of Industrial System Engineering and Management
This work is licensed under a Creative Commons Attribution 4.0 International License.
