Performance Measurement of Green Manufacturing in the Refined Sugar Industry Using the Green Supply Chain Operation Reference Approach at PT. ABC
DOI:
https://doi.org/10.56882/jisem.v3i2.38Keywords:
Green Manufacturing, Refined Sugar Industry, Green SCOR Framework, Sustainability Performance, Sustainability Performance.Abstract
The manufacturing industry, including the refined sugar industry, faces challenges in minimizing environmental impact and enhancing operational sustainability. The implementation of the green manufacturing concept is essential to achieving these goals. This study aims to evaluate the green manufacturing performance of PT. ABC, focusing on environmental, economic, and social aspects. The research methodology employed is a qualitative and quantitative descriptive analysis using relevant frameworks and metrics based on the Green SCOR. The findings indicate that PT. ABC has implemented several green manufacturing practices; however, there are still areas that need improvement, such as high energy consumption and a high defect rate. This study provides recommendations to enhance green manufacturing performance at PT. ABC, including optimizing energy use, reducing waste, and improving production process efficiency. The results of this study are expected to serve as a reference for PT. ABC in developing strategies and improvement plans to achieve better operational and environmental sustainability.
References
D. L. Sari et al., “The effect of job stress to employee performance: Case study of manufacturing industry in Indonesia,” IOP Conf Ser Earth Environ Sci, vol. 794, no. 1, p. 012085, Jul. 2021, doi: 10.1088/1755-1315/794/1/012085.
A. Rehman, H. Ma, M. Ahmad, M. Irfan, O. Traore, and A. A. Chandio, “Towards environmental Sustainability: Devolving the influence of carbon dioxide emission to population growth, climate change, Forestry, livestock and crops production in Pakistan,” Ecol Indic, vol. 125, p. 107460, Jun. 2021, doi: 10.1016/j.ecolind.2021.107460.
A. Belhadi, S. S. Kamble, K. Zkik, A. Cherrafi, and F. E. Touriki, “The integrated effect of Big Data Analytics, Lean Six Sigma and Green Manufacturing on the environmental performance of manufacturing companies: The case of North Africa,” J Clean Prod, vol. 252, p. 119903, Apr. 2020, doi: 10.1016/j.jclepro.2019.119903.
S. Agarwal, V. Agrawal, and J. K. Dixit, “Green manufacturing: A MCDM approach,” Mater Today Proc, vol. 26, pp. 2869–2874, 2020, doi: 10.1016/j.matpr.2020.02.595.
S. P. S. Rajput and S. Datta, “Sustainable and green manufacturing - A narrative literature review,” in Materials Today: Proceedings, Elsevier Ltd, 2019, pp. 2515–2520. doi: 10.1016/j.matpr.2020.02.535.
K. Karuppiah, B. Sankaranarayanan, S. M. Ali, P. Chowdhury, and S. K. Paul, “An integrated approach to modeling the barriers in implementing green manufacturing practices in SMEs,” J Clean Prod, vol. 265, pp. 1–54, Aug. 2020, doi: 10.1016/j.jclepro.2020.121737.
J. F. Sinuraya, M. Suryadi, E. Ariningsih, Ashari, and T. B. Puwantini, “Policy and action plan to increase national sugar production,” IOP Conf Ser Earth Environ Sci, vol. 1153, no. 1, p. 012011, May 2023, doi: 10.1088/1755-1315/1153/1/012011.
A. F. Fudhlaa, W. Rachmawati, and D. Retnowati, “Analysis of sugar import policy effects on sugar cane farmer’s income in East Java: A system dynamic approach,” IOP Conf Ser Mater Sci Eng, vol. 1072, no. 1, p. 012023, Feb. 2021, doi: 10.1088/1757-899X/1072/1/012023.
A. Mail, N. Chairany, and A. Fole, “Evaluation of Supply Chain Performance through Integration of Hierarchical Based Measurement System and Traffic Light System: A Case Study Approach to Iron Sheet Factory,” Makassar, Oct. 2019. doi: 10.59160/ijscm.v8i5.2584.
E. Kusrini, K. N. Safitri, and A. Fole, “Design Key Performance Indicator for Distribution Sustainable Supply Chain Management,” in 2020 International Conference on Decision Aid Sciences and Application, DASA 2020, Institute of Electrical and Electronics Engineers Inc., Nov. 2020, pp. 738–744. doi: 10.1109/DASA51403.2020.9317289.
A. Setyadi, E. Rimawan, I. Kristanto, and P. E. Rohmah, “A proposed conceptual framework of supply chain operations reference (SCOR) model in Indonesian industries: a literature review,” SINERGI, vol. 26, no. 3, p. 385, Oct. 2022, doi: 10.22441/sinergi.2022.3.014.
F. Khair and S. Rini, “Analysis of the supply chain performance measurement system using the SCOR 12.0 and the value stream mapping method approach towards sustainability strategy (case study: power generation company in Indonesia),” IOP Conf Ser Earth Environ Sci, vol. 1169, no. 1, p. 012035, Apr. 2023, doi: 10.1088/1755-1315/1169/1/012035.
S. Sahoo and L. Vijayvargy, “Green supply chain management practices and its impact on organizational performance: evidence from Indian manufacturers,” Journal of Manufacturing Technology Management, vol. 32, no. 4, pp. 862–886, Apr. 2021, doi: 10.1108/JMTM-04-2020-0173.
S. Gawusu, X. Zhang, S. A. Jamatutu, A. Ahmed, A. A. Amadu, and E. Djam Miensah, “The dynamics of green supply chain management within the framework of renewable energy,” Int J Energy Res, vol. 46, no. 2, pp. 684–711, Feb. 2022, doi: 10.1002/er.7278.
A. S. Putri and W. A. Prabowo, “Supply Chain Performance Measurement Using SCOR 12.0 In Sport Shoes Company,” Jakarta Barat, Jun. 2023. doi: 10.24912/jitiuntar.v11i1.21056.
A. Saleh, A. Ahmad, Y. Herdianzah, D. Lantara, N. I. Saputra, and M. Dahlan, “Supply Chain Performance Measurement at PT. Perkebunan Nusantara XIV Camming Sugar Factory in Bone District,” International Journal of Industrial Engineering and Engineering Management, vol. 5, no. 2, pp. 61–66, Dec. 2023, doi: 10.24002/ijieem.v5i2.6861.
P. Ghadimi, S. O’Neill, C. Wang, and J. W. Sutherland, “Analysis of enablers on the successful implementation of green manufacturing for Irish SMEs,” Journal of Manufacturing Technology Management, vol. 32, no. 1, pp. 85–109, Aug. 2020, doi: 10.1108/JMTM-10-2019-0382.
M. Singh, K. Singh, and A. S. Sethi, “Analytical hierarchy process and TOPSIS for selecting best parameters of green manufacturing,” Measuring Business Excellence, vol. 24, no. 3, pp. 345–365, Jun. 2020, doi: 10.1108/MBE-08-2019-0076.
A. Fole, “Peningkatan Kinerja Pada Industri Kerajinan Songko Recaa (Studi Kasus : UKM ISR Bone),” Yogyakarta, Jul. 2022. Accessed: Aug. 06, 2024. [Online]. Available: https://dspace.uii.ac.id/handle/123456789/39404
R. Adwiyah, Y. Syaukat, D. Indrawan, and H. Mulyati, “Examining Sustainable Supply Chain Management (SSCM) Performance in the Palm Oil Industry with the Triple Bottom Line Approach,” Sustainability, vol. 15, no. 18, p. 13362, Sep. 2023, doi: 10.3390/su151813362.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Journal of Industrial System Engineering and Management
This work is licensed under a Creative Commons Attribution 4.0 International License.
